NA6D Shielded USB Cable
NA6D Shielded USB Cable
By NA6D
Share
358 in stock
Couldn't load pickup availability
Stop fighting RFI. Start making contacts. Standard consumer cables aren't built for the RF environment of a ham shack. This cable is. Designed and torture-tested by hams, the NA6D cable eliminates the RFI that causes USB lockups and transmit issues..
Choose Your Connection
Select the Host Side connector that fits your setup. All cables feature a Right-Angle USB-C on the device side to keep cabling away from your HT antenna.
- USB-A (60cm): The standard for most laptops, desktops, and Raspberry Pi 3/4/5.
- USB-C (60cm): Perfect for modern MacBooks, tablets, and Android phones.
- Micro USB (30cm or 60cm): The "Dongle Killer." Connects directly to a Raspberry Pi Zero / Zero 2 W without OTG adapters.
- 30cm: Ultra-compact for piggyback portable nodes.
- 60cm: Standard reach for field operations.
Engineered for Radio
We engineered the specs to solve radio-specific problems
- Antenna-Clearance Right Angle: The cable keeps the cable away from the antenna on the HT to minimize inductive coupling and reduces mechanical strain.
- Resonance-Free Length: At 60cm, the length is calculated to avoid acting as an antenna on 2m and 70cm frequencies.
- Dual Massive Ferrites: Two RH ferrite cores provide over 100Ω of impedance at 100MHz, crushing common-mode current before it hits your device.
- Premium Shielding & Materials: A high-quality copper braid and foil wrap protect the data lines, encased in premium TPE that stays flexible in cold field conditions.
Torture Tested
Validated in worst-case RF scenarios where standard cables caused USB lockups. The NA6D cable holds the line, maintaining stable data and power connections even when the RF gain is cranked up.
Technical Specifications
- Device Side: USB-C Right angle (Fits AIOC)
- Host Side Options:
- USB-A: For standard laptops and desktops (60cm).
- USB-C: For modern MacBooks, tablets, and phones (60cm).
- Micro USB: For Raspberry Pi Zero / Zero 2 W (Available in 30cm & 60cm).
- USB Speed: 2.0 Full Speed
- Length: 60cm / ~2ft
- Ferrite Mix: Dual RH 12x20x7.3mm Cores
- Impedance @ 25MHz: >55Ω (Typ. 65Ω)
- Impedance @ 100MHz: >100Ω (Typ. 120Ω)
- Jacket Material: Premium TPE (Thermoplastic Elastomer)
- Shielding: Braided Copper + Foil Wrap
Get the cable that was designed for your hobby, not for charging a phone.
Very good quality product. No issues.
Great quality product.
A lot better then the fldigi coiled cable could use a hair more length when trying to use winlink and you have to move your ht for a signal over the whole package was a great purchase easy to set up and worked great with my ht
Perfectly done. Shipping was fast.
Had one of three arrive with a short circuit but NA6D made right immediately by sending a good replacement ASAP. I'm very happy with my experience doing business with this company.