The PCB arrived intact and ready to use, plugged straight into the UV-5R audio sockets and USB to my Digipi ready pi and I was off to the races.
All good from my view, my only suggestion would be a little more packing material in the shipping envelope for protection against USPS.
Steve - KC0NGU

Great little adapter, works as advertised.

Potential gotchas:
At first I had issues with the USB C port having a loose, inconsistent connection but it turned out I wasn't plugging the cable in all the way. The device would also get stuck with the PTT open transmitting silence. Checking the logs and internet lead me to realize the radio's transmission was causing interference with my cable (despite a ferrite bead). Moving the antenna away and plugging the cable completely in solved both these problems and it's now working like a charm.

Soldering:
The 3d printed soldering guide did great job of holding the jacks and board in. The locating holes on the board a great touch here. It was also clear from the silkscreen on the board which jacks went where. Soldering went smoothly.

Small Gripe:
My biggest complaint is for my Baofeng radio the LEDs are on the far side of the board making it tricky to view them and the screen at the same time. But there are surface mount pads on the backside too, so I might be able to fix this annoyance myself.

Service:
The service from NA6D was great. My order was processed the same day. Shipping took a few days, but that's entirely acceptable considering this isn't Amazon. There was a mistake in my order and it was rectified with the same speed and courtesy. Would happily buy from again.

with the included soldering jig, attaching the audio connectors was a real breeze and I am no soldering expert, by any definition!

Absolutely fantastic product! The included soldering guide made the whole thing a five minute affair, it was pre-flashed with the latest firmware, and I was off and programming within about 10 minutes of opening the package. Easily beats any other programming cable you can buy not to mention all the additional advanced features. The 3D printed case was also very high quality, no rough edges and snapped together, cleanly.

I bought 2 units. They are great quality and combined with the solder guide very easy to put together. Shipping to Florida was quick. You do need a USB cable with ferrite clamp to prevent lockup on TX. I needed USB-C to USB micro for PI 2W so I ordered my own cable and some ferrite clamps.

Works perfectly fine with my Quancheng - Raspberry Pi 5 Allstarlink Setup. Thanks!!!

Shipped very fast, I flashed this for use as an All Star ASL3 hot spot,
It works perfectly!
I'm listening to the Alaska net as I type this.
I just ordered the USB A to C cable with chokes, mine with add on chokes is too ugly.

Now I'm considering two low power simplex links in different cities using this AIOC.

Fantastic device which is extremely useful. We primarily use it for WInLink using Vara FM but will work with many digitial services. Also very handy to program the HT. NA6D is very responsive to requests. Overall this is a real value.

The AIOC solder kit was easy to assemble especially with the free jig to keep it in place while soldering. I had an issue with the cable and chirp so I emailed and asked a question. The response time was reasonable and the answer was helpful. I ordered 2 more for some friends. The cable works as expected.

The AIOC device is a great piece of kit.
If you want to keep things highly portable, this is the way to go!

Item was shipped and received in a timely manner. Item works as advertised, I would definitely recommend this seller.

Excellent build quality, quickly took care of a shipping mishap. Thank you!